Volume 20.2a

Upcoming Events
Verification and Validation Are Focus of Technical Presentations at CAE Events

DatapointLabs and Matereality are attending more than half a dozen technical meetings and trade events through June 2014. The importance of verification and validation in the context of manufacturing simulation forms the focal point of presentations prepared for CAE- and FEA-related events.

Hubert Lobo will deliver Providing an Experimental Basis in Support of Finite Element Analysis at the SIMULIA Community Conference in Providence, RI, USA. DatapointLabs is also a conference sponsor, so be sure to stop by our booth if you're attending the event.

View abstract > 

Daniel Roy will deliver The Use of Digital Image Correlation (DIC) and Strain Gauges to Validate Simulation at the NAFEMS USA Regional Conference in Colorado Springs, CO, USA.

View abstract > 

Brian Croop will deliver Validation of Simulation Results Through Use of DIC Techniques at the ANSYS Conference & CADFEM Users' Meeting in Nuremberg, Germany. DatapointLabs is also an exhibitor, and we would be happy to meet with you during the event.

View abstract >

New Multi-CAE TestPaks® Deliver Data for Injection Molding and Crash Simulations

If you support a variety of CAE/FEA codes in your work, DatapointLabs introduces new Multi-CAE TestPaks to more efficiently meet your need for the right data, in the right formats to accomplish injection molding and crash simulations. Now you can order a single set of tests to generate all of the required data for a specific purpose, no matter which supported software package – or packages - you might be using. The Multi-CAE TestPaks save you both time and money, compared to ordering tests to produce the required data for each software package individually.

Find the new Multi-CAE TestPaks in our expanded online Test Catalog:

  • Multi-CAE Molding – Test results include the data required to create material input files for Moldflow, Moldex3D and Simpoe simulations. Material input files for each of these software packages, as well as for SigmaSoft simulations, also are provided.
  • Multi-CAE Crash – Test results include the data required to create material input files for LS-DYNA, Abaqus, and PAM-CRASH simulations. Material input files for each of these software packages also are provided.

When you order a Multi-CAE TestPak, we deliver your material properties data along with the associated material cards to your Matereality database. You can take advantage of Matereality's CAE Modeler software to fine-tune the material model inputs for your CAE applications, if desired. Then save your formatted material cards in the Material Model Library for later reference or reuse.


  DatapointLabs, LLC 
is ranked among the 
Top 100 Engineering Companies 
on the 2013 Inc. 500|5000 list

Register for Digital Data Delivery Service

About TestPaks

Tel: +1-607-266-0405 (in Europe, +353 1 442 9204) | info@datapointlabs.com | www.datapointlabs.com