Materials insight

Datapoint Newsletter: Summer '10, Volume 16.3

by Datapoint Newsletters5,913 views

DatapointLabs Joins TechNet Alliance. ANSYS Chaboche Model. CAE-INPUT Decks Now Available for ANSYS Polyflow. Foam Modeling in ANSYS.
Volume 16.3
DatapointLabs Joins TechNet Alliance
Our testing lab has become expert in understanding material models for CAE simulations and is dedicated to educate and serve the community on the latest simulation developments. As a new member of the TechNet Alliance, we will work with our partners to expand our efforts worldwide.
ANSYS Chaboche Model

Datapointlabs can now create and fit material data to the ANSYS Chaboche Model. This CAE model shows the ratcheting effect and kinematic hardening of metals.
CAE-INPUT Decks Now Available for ANSYS Polyflow

Our ANSYS Polyflow TestPaks now include input decks that load directly into ANSYS Polyflow. CAE Analysts can save hours of complex manual data fitting of visco-elastic polymer material models for extrusion, blow molding and thermoforming simulation.
Foam modeling in ANSYS

Classically a very difficult model to calibrate, the ANSYS hyperfoam data fitting is enabled by adding volumetric data or lateral strain data to model variable Poisson's ratio. Applications include foam seals, seats, mattresses and packaging.
See You At:
  http://www.testpaks.com/datapoint_newsletter.asp http://www.datapointlabs.com/dds_details.asp http://www.testpaks.com/about.asp  
Contact Us (607) 266-0405   www.datapointlabs.com

 

ANSYSFoamsMetalsNewslettersPOLYFLOW Blow MoldingPOLYFLOW ExtrusionPOLYFLOW Thermoforming

About the author

Datapoint Newsletters

Datapoint Newsletter reports on advances in material testing, materials information management, and material properties for engineering design. It has been published approximately quarterly by DatapointLabs since 1995. Today, issues of Datapoint are available online and via e-mail.

Keep exploring