Nonlinear viscoelastic modeling for foams

Lightweight design is one of the major principles in automotive engineering and has made polymer materials to inherent parts of modern cars. In addition to their lightweight thermoplastics, elastomers, fabric and composites also incur important functions in passive safety. In the age of virtual prototyping, assuring these functions requires the accurate modeling of the mechanical behavior of each component. Due to their molecular structure, polymer materials often show viscoelastic characteristics such as creep, relaxation and recovery. However, considering the general state of the art in crash simulation, the viscoelastic characteristics are mainly neglected or replaced by viscoplastic or hyperelastic and strain rate dependent material models. This is either due to the available material models that are often restricted to linear viscoelasticity and thus cannot model the experimental data or due to the time consuming parameter identification. In this study, a nonlinear viscoelastic material model for foams is developed and implemented as a user material subroutine in LS-DYNA. The material response consists of an equilibrium and a non-equilibrium part. The first one is modeled with a hyperelastic formulation based on the work of Chang [8] and formerly implemented as *MAT_FU_CHANG_FOAM in LS-DYNA (*MAT_083). The second one includes the nonlinear viscoelastic behavior following the multiple integral theory by Green and Rivlin [9]. The polyurethane foam Confor CF-45 used as part of the legform impactor in pedestrian safety was chosen for its highly nonlinear viscoelastic properties to test the presented approach. The investigation shows the ability of the method to reliably simulate some important nonlinear viscoelastic phenomena such as saturation.