Datapoint Newsletter: Spring 2024, Vol. 30.1
Successful accreditation audits; company growth; technical conferences
Read full postDatapoint Newsletter: Fall 2022, Vol. 28.2
DatapointLabs Invests in New Testing Capabilities, Expands Market Reach
Read full postMaterials Data Workflow for Simulation of Composites in Transportation Applications
Multi-scale material models are being increasing applied for high level simulation of complex materials such as UD layups, fabric laminate composites, fiber-filled plastics. These models require data inputs from a variety of material tests which are then assembled into models used in the finite element solvers. We present an infrastructure for the digitalization of such information, where the required material data are collected including a process for maintaining traceability and consistency of the source data. Information about the compositional characteristics and processing history are captured. Built-in software modules or external client tools can be used for calibration of material models with the resulting material file linked to the source data. The accuracy of the reduced order model can be checked by running a validation simulation against a physical test. Models can be published and released into a master CAE materials library output where they can be used to model such materials for a variety of target solvers. This process improves the reliability and accuracy of composites simulation.
Read full postAdditive Manufacturing Workflows
Simulation uncertainties arise from different assumptions made in model creation. Mid-stage software validations improve confidence and optimize the design of additively manufactured aerospace components.
Read full postA Design-Validation-Production Workflow for Aerospace Additive Manufacturing
With the advent of 3D printing and additive manufacturing, manufacturing designs previously thought difficult to produce can now be generated quickly and efficiently and without tooling. In the aerospace industry, weight is often tied directly to cost and is thus of great importance to any engineering design. Traditionally, the design process often involves much iteration between the designer and the analyst, where the designer submits a design to the analyst, and then the analyst completes his or her analysis and sends recommendations back to the designer. The process is repeated until a valid design meets the analysis criteria. The design is then handed to the manufacturing team which then may have additional constraints or concerns and iterations can continue. Additive manufacturing coupled with topology optimization allows the design and analysis loops and manufacturing iterations to be reduced significantly or even eliminated. The critical step is to ensure that the part will perform as simulated.
Read full postDetermination and Use of Material Properties for Finite Element Analysis: Book Review
This book is intended to be a companion to the NAFEMS book, "An Introduction to the Use of Material Models in FE". It informs Finite Element Analysis users of the manner and methodologies by which materials are tested in order to calibrate material models currently implemented in various FEA programs. While the authors seek first to satisfy the basic material models outlined in the companion book, they make important extensions to FEA used in currently active areas including explicit simulation.
Read full postFrom Manufacturing to Design Validation
[We] introduced the topic of injection molding process simulation and the influence of the manufacturing process on structural analysis. The strength and stiffness of a part can be inaccurately represented if the manufacturing process conditions are not properly considered. This results in a different calculation of system natural frequencies or improper estimation of the energy absorbing characteristics. We continue on this topic, extending the scope to advanced technologies available in the Altair Partner Alliance (APA) to help solve the problem of proper design validation with fiber reinforced plastics.
Read full postMatereality Webinar: Finite Element Analysis of Additively Manufactured Products
With the growing interest in additive manufacturing in the aerospace industry, there is a desire to accurately simulate the behavior of components made by this process. The layer by layer print process appears to create a morphology that is different from that from conventional manufacturing processes. This can have dramatic impact on the material properties, which in turn, can affect how the material is modeled in simulation. We tested an additively manufactured metal part for mechanical properties and validated the material model used in a linear static simulation.
Read full postDevelopment, implementation and Validation of 3-D Failure Model for Aluminium 2024 for High Speed Impact Applications
FAA William J Huges Technical Center (NJ) conducts a research project to simulate failure in aeroengines and fuselages, main purpose is blade-out containment studies. This involved the implementation in LS-DYNA of a tabulated generalisation of the Johnson-Cook material law with regularisation to accommodate simulation of ductile materials.
Read full post