Material Insights by Test Type

Mechanical

Sort byDateViews

Insights into the Simulation of Failure of Ductile Plastics

by DatapointLabs6,390 views

Performing simulations that can approximate the material behavior of ductile plastics is daunting. Factors such as nonlinear elasticity, inclusion of volumetric and deviatoric behavior, finding and correctly applying the proper material data to create failure criteria are only a few hurdles. A variety of material models exist, each with numerous settings and varied parameter conversion methods. Combined, these cause a great deal of uncertainty for the FEA user. In previous papers, we delved into material models for both LS-DYNA (MAT089, MAT024, and MAT187) and ABAQUS (*ELASTIC, *PLASTIC) using mid-stage validation as a technique to probe solver accuracy. In this presentation, we summarize our findings on the benefits of this combined approach as a general tool to test and tune simulations for greater reliability.

Read full post
AutomotiveHigh Speed TestingMechanicalNonlinear Material ModelsPlasticsPresentationsStructural AnalysisUniversal CrashValidation

Workshop: Testing, Modeling and Validation for Plastics & Rubber Simulation in ANSYS

by DatapointLabs8,015 views

Plastics exhibit non-linear viscoelastic behavior followed by a combination of deviatoric and volumetric plastic deformation until failure. Capturing these phenomena correctly in simulation presents a challenge because of limitations in commonly used material models. We follow an approach where we outline the general behavioral phenomena, then prescribe material models for handling different phases of plastics deformation. Edge cases will then be covered to complete the picture. Topics to be addressed include: Using elasto-plasticity; When to use hyperelasticity; Brittle polymers – filled plastics; Failure modes to consider; Criteria for survival; Choosing materials; Spatial non-isotropy from injection molding; Importance of residual stress; Visco-elastic and creep effects; Strain-rate effects for drop test and crash simulations; Fitting material data to FEA material models; The use of mid-stage validation as a tool to confirm the quality of simulation before use in real-life applications.

Read full post
ANSYSDensityHyperelasticInjection MoldingMechanicalPlasticityPlasticsPresentationsRate DependencyRheologyRubbersStructural AnalysisThermalValidationViscoelasticYielding/Failure Analysis

A Mechanism for the Validation of Hyperelastic Materials in ANSYS

by DatapointLabs7,024 views

Hyperelastic material models are complex in nature requiring stress-strain properties in uniaxial, biaxial and shear modes. The data need to be self-consistent in order to fit the commonly used material models. Choosing models and fitting this data to these equations adds additional uncertainty to the process. We present a validation mechanism where, using of a standard validation experiment one can compare results from a simulation and a physical test to obtain a quantified measure of simulation quality. Validated models can be used with greater confidence in the design of real-life components.

Read full post
ANSYSHyperelasticMechanicalPapersPresentationsStructural AnalysisValidation

Using Mid-stage Validation to Increase Confidence in Simulation of TPOs

by DatapointLabs6,168 views

Finite element analysis of plastics contains assumptions and uncertainties that can affect simulation accuracy. It is useful to quantify these effects prior to using simulation for real-life applications. A mid-stage validation uses a controlled physical test on a standardized part to compare results from simulation to physical experiment. These validations do not use real-life parts but carefully designed geometries that probe the accuracy of the simulation; the geometries themselves can be tested with boundary conditions that can be simulated correctly. In one study, a quasi-static three-point bending experiment of a standardized parallel ribbed plate is performed and simulated, using Abaqus. A comparison of the strain fields resulting from the complex stress state on the face of the ribs obtained by digital image correlation (DIC) vs. simulation is used to quantify the simulation's fidelity. In a second study, a dynamic dart impact experiment is validated using LS-Dyna probing the multi-axial deformation of a polypropylene until failure.

Read full post
AbaqusAutomotiveLS-DYNAMechanicalPlasticsPresentationsStructural AnalysisValidation

Progress on the Validation of Simulation for Ductile Polymers

by Hubert Lobo6,348 views

We will focus on our work related to the testing, modeling and validation of simulation for crash and durability applications, including testing techniques, software tools for material parameter conversion, and the use of a mid-stage validation process that uses standardized experiments to check the accuracy of the simulation prior to use in real-life applications. In addition, we present a short introduction to the Knowmats initiative which seeks to collect posts and links to papers from industry experts as a reference for simulation professionals.

Read full post
AutomotiveHigh Speed TestingMechanicalNonlinear Material ModelsPlasticsPresentationsStructural AnalysisUniversal CrashValidation

Damage Modeling under Impact Loading in Talc-Filled Polypropylene Compounds

by Massimo Nutini6,634 views

Topics covered: Damage in mineral filled polypropylene under impact conditions; damage modeling and parameter identification (prior art, LyondellBasell contributions, debate in the CAE community); experimental and numerical validation; next steps

Read full post
AutomotiveHigh Speed TestingLS-DYNAMaterial SupplierMechanicalPlasticsPresentationsRate DependencyYielding/Failure Analysis

A Standardized Mechanism to Validate Crash Models for Ductile Plastics

by DatapointLabs7,342 views

Quantifying simulation accuracy before running crash simulations could be a helpful confidence building measure. This study continues our development of a mechanism to validate material models for plastics used in modeling high-speed impact. Focusing on models for isotropic materials that include options for rate dependency and failure, we explore other models commonly used for ductile plastics including MAT089 and MAT187.

Read full post
AutomotiveHigh Speed TestingLS-DYNAMechanicalPackagingPlasticsRate DependencyResearch PapersToys/Sporting GoodsValidationYielding/Failure Analysis

Determination and Use of Material Properties for Finite Element Analysis: Book Review

by DatapointLabs9,870 views

This book is intended to be a companion to the NAFEMS book, "An Introduction to the Use of Material Models in FE". It informs Finite Element Analysis users of the manner and methodologies by which materials are tested in order to calibrate material models currently implemented in various FEA programs. While the authors seek first to satisfy the basic material models outlined in the companion book, they make important extensions to FEA used in currently active areas including explicit simulation.

Read full post
ANSYSAbaqusAerospace and DefenseAltair RADIOSSAutomotiveBiomedicalBook ReviewBuilding MaterialsCAE Vendor/SupplierConsumer ProductsDIGIMATEnergy and PetroleumFoamsFurnitureHigh Speed TestingHome AppliancesHyperelasticIndustrial GoodsLS-DYNAMSC.DYTRANMSC.MARCMSC.NASTRANMaterial SupplierMechanicalMetalsNX NastranNonlinear Material ModelsPAM-COMFORTPAM-CRASHPackagingPlasticityPlasticsRate DependencyResearch LaboratoryRubbersSIMULIASOLIDWORKSStructural AnalysisViscoelasticYielding/Failure Analysis