Brian Croop and Hubert Lobo. NAFEMS World Congress. 2013.
September 15, 2013 | by DatapointLabs | views 4330
The development of material parameters for FEA is heavily reliant on precision material data that captures the stress-strain relationship with fidelity. While conventional methods involving UTMs and extensometers are quite adequate for obtaining such data on a number of materials, there are important cases where they have been known to be inadequate. The testing of composites to obtain directional properties remains a complex task because of the difficulty related to measuring these properties in different orientations. Digital Image Correlation (DIC) methods are able to capture the stress-strain relationship all the way to failure. In this paper, we combine DIC and conventional methods to measure directional properties of composites. We exploit the unique capability of DIC to retroactively place virtual strain gauges in areas of critical interest in the test specimen. Utilising an Iosipescu fixture, we measure shear properties of structured composites in a variety of orientations to compute the parameters of an orthotropic linear elastic material model. Model consistency is checked by validation using Abaqus.
Brian Croop and Hubert Lobo. NAFEMS World Congress. 2013.
Aerospace and Defense Nonlinear Material Models Structural Analysis Abaqus Composites SIMULIA Research Papers
Validating Simulation Using Digital Image Correlation
A Novel Technique to Measure Tensile Properties of Plastics at High Strain Rates
A Robust Methodology to Calibrate Crash Material Models for Polymers
High Speed Stress Strain Material Properties as Inputs for the Simulation of Impact Situations
Practical Issues in the Development and Implementation of Hyperelastic Models